|
Fiat Diagnostic Program of X-431 Product Family V21.00
2008-11-28
Compared with the previous version, the following contents are added/improved:
1. Added some new systems:
stilo 1.8 16V
Hitachi EOBD injection
BOSCH ABS 5.7 VDC
PUNTO 1.4 16V
BOSCH 8 VDC ABS
Bsoch Motronic ME7.3H4M EOBD Injection
doblo 1.9 JTD
Bosch EDC 15 CF3/ EOBD Diesel injection (eng.1.9 2.4)
Panda '03 1.2 8V
Magneti Marelli IAW 4AF/4EF/59F/5AF EOBD injection
DELPHI electric Steering
Bosch 8 ABS
Injection -Magneti Marelli IAW 5NF EOBD
MULTIPLA '02 1.9 JTD
Bosch EDC15 CF3/EOBD Diesel Injection (eng. 1.9/2.4)
2. Improved the DTC base.
GM Diagnostic Program of X-431 Product Family V31.00
2008-11-28
Compared with the previous version, the following contents are added/improved:
1. Added ECM of CAN BUS protocol for each model (2004-2007) with the functions of read DTC, clear DTC and read datastream.
2. Added TCM of CAN BUS protocol for each model (2004-2007) with the functions of read DTC, clear DTC and read datastream.
3. Added BCM of CAN BUS protocol for each model (2004-2007) with the functions of read DTC, clear DTC and read datastream.
4. Added IPC of CAN BUS protocol for each model (2004-2007) with the functions of read DTC, clear DTC and read datastream.
5. Added SIR of CAN BUS protocol for each model (2004-2007) with the functions of read DTC, clear DTC and read datastream.
6. Added ABS of CAN BUS protocol for each model (2004-2007) with the functions of read DTC, clear DTC and read datastream.
Euro Ford Diagnostic Program of X-431 Series V20.90
2008-11-28
Compared with the previous version, the following contents are added/improved:
1. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC of 2008 Fiesta 1.25.
2. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC of 2008 Fiesta 1.4.
3. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC of 2008 Fiesta 1.4D TDCi.
4. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC/TCM/ACM/EATC of 2008 Fiesta 1.6.
5. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC/ACM of 2008 Fiesta 2.0ST.
6. The functions of read DTC, clear DTC and read datastream have been added for ABS/ACM/GEM/IC/PCM/RCM of 2002~2008 Fiesta 3-Door 1.4D TDCi (no function of read datastream in original RCM).
7. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC/EPS/ACM of 2008 Focus 1.6D TDCi.
8. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC/EPS/ACM of 2008 Focus 1.8D TDCi.
9. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC/ACM/DDM/PDM/RLDM/RRDM of 2008 Focus C-Max 1.6.
10. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC/ACM/DDM/PDM/RLDM/RRDM of 2008 Focus C-Max 1.8.
11. The functions of read DTC, clear DTC and read datastream have been added for CTM/ECS/PCM of 2008 Fusion 1.4.
12. The functions of read DTC, clear DTC and read datastream have been added for ABS/PCM/RCM/GEM/IC/TCM of 2008 Fusion 1.4.
13. The functions of read DTC, clear DTC and read datastream have been added for ABS/BCM/PCM/ACM/DDM/HVAC/IPC/PDM/RCM of 2006~2008 Galaxy 2.0D DI (no function of read datastream in original ACM/RCM).
14. The functions of read DTC, clear DTC and read datastream have been added for ABS/BCM/PCM/PSCM/SASM/ACM/DDM/HVAC/IPC/PDM/RCM of 2006~2008 Galaxy 2.0D TDCi (no function of read datastream in original ACM/PSCM/SASM/RCM).
15. The functions of read DTC, clear DTC, read datastream, injector programming and key programming have been added for ABS/PCM/RCM/GEM/ACM/EATC of 2008 Mondeo 2.2D TDCi.
16. The basic functions have been added for ABS/BCM/PCM/ACM/DDM/HVAC/IPC/PDM/RCM of 2006~2008 S-Max 2.0D DI (no function of read datastream in original RCM).
17. The basic functions have been added for ABS/BCM/PCM/PSCM/SASM/ACM/DDM/HVAC/IPC/PDM/RCM of 2006~2008 S-Max 2.0D TDCi (no function of read datastream in original ACM/PSCM/SASM/RCM).
18. Supports the Super-16 connector.
Benz Diagnostic Program for X-431 Product Family V35.10
2008-11-27
Compared with the previous version, ME2 gasoline engine has been re-classified for 215 (Up to 08/2002) and 220 (Up to 08/2002), with the functions of read version information, read DTC, clear DTC, read datastream, activation test and control unit match.
RENAULT Diagnostic Program for X-431 Product Family V28.00
2008-11-27
Compared with the previous version, the following contents are added/improved:
1. The new mode of PETROL INJECTION has been added for Megane Ⅱ.
2. The new mode of ABS has been added for Megane Ⅱ.
3. The new mode of INSTRUMENT PANEL has been added for Megane Ⅱ
4. The new mode of VARIABLE P.A.S has been added for Megane Ⅱ.
5. The new mode of Injection has been added for Modus.
6. The new mode of ENGINE IMMOBILIZER has been added for KANGOO MUX.
X-431 display program V14.30
2008-11-26
Compared with the previous version, the following contents are added/improved:
1. Solved the problem of the system halted in the event that the printer is uninstalled or unselected while you press the print button.
2. Added the X axis of time when displaying one datastream wave only.
Honda Diagnostic Program for X-431 Product Family V32.00
2008-11-25
Compared with the previous version, the following contents are added/improved:
1. The problem of that the communication is interrupted when you test the engine system or AT system was solved.
2. The problem with reading datastream of IMA was solved.
3. The VTM4 system was added with the functions of read DTC, clear DTC, read datastream and the function test.
SAAB Diagnostic Program of X-431Product Family V15.36
2008-11-24
Compared with the previous version,
the problem with reading datastream was solved tor the 900 model engine Motronic 2.8.1 (V6).
VW Diagnostic Program of X-431 Product Family V24.30
2008-11-24
Compared with the previous version, the following contents are added/improved:
1. SUPER-16 connector program was added.
2. It was modified to use a 7-digits password to log in.
3. Modified the whole vehicle state collection of DIAGUN.
4. L-line communication was added.
AUDI Diagnostic Program of X-431 Product Family V24.90
2008-11-24
Compared with the previous version, the following contents are added/improved:
1. SUPER-16 connector program was added.
2. It was modified to use a 7-digits password to log in.
3. Modified the whole vehicle state collection of DIAGUN.
4. L-line communication was added.
Mitsubishi Diagnostic Software for X-431 Product Family V24.04
2008-11-24
Compared with the previous version,
the problem with the AT actuation in "Asian Standard 16PIN, 12+16PIN DLC" was solved (Mitsubishi protocol).
SUZUKI Diagnostic Program of X-431 Product Family V23.00
2008-11-22
Compared with the previous version, the following contents are added/improved:
1. In the North America market, one mode was added for the engine system of AERIO, and one mode was added for the transmission system of AERIO; two modes were added for the engine system of .XL-7/GRAND VITARA/VITARA.
2. In the non North America market, three modes were added for the engine system of SWIFT, two modes were added for the transmission system of SWIFT; two modes were added for the engine system of WAGON R+, one mode was added for the transmission system of WAGON R+; one mode was added for the engine system of EVERY+/LANDY, one mode was added for the transmission system of EVERY+/LANDY; two modes were added for the engine system of CARRY 13, two modes were added for the transmission system of CARRY 13; one mode was added for the transmission system of JIMNY; one mode was added for the transmission system of APV/CARRY, one mode was added for the engine system of SX4.
Chrysler Diagnostic Program of X-431 Product Family V18.05
2008-11-22
Compared with the previous version, the following contents are added/improved:
1. Solved the problem of that it was unable to access the BCM with CANBUS protocol.
2. Solved the problem of that the contents could not be displayed out when reading the WCM system configuration.
Benz Diagnostic Program for X-431 Product Family V35.00
2008-11-18
Compared with the previous version, the following contents are added/improved:
1. Program was optimized.
2. Provided details for A/C system of Chassis 221, 211, 203, 219 and 171, and added the match function.
Mazda Diagnostic Program of X-431 Series V32.01
2008-11-13
Compared with the previous version, the followings have been added or improved:
1. Optimized software configuration.
2. Added PCM, TCM, ICM, ABS and RCM for 176 classifications of MAZDA2 (EURO STG3/4 Spers.) model, with functions including: read DTC, erase DTC and read datastream.
Benz Transporter & V-Class Diagnostic Program of X-431 Series V16.05
2008-11-13
Compared with the previous version, the followings have been added for this version:
1. Added reset function for KI system of SPRINTER VIT0638.
2. Added adaptation and reset functions for KI system of SPRINTER VIT0639.
3. Added reset function for KI system of SPRINTER 901.6, 902.6, 903.6, 904.6, 905.6.
4. Added reset function for KI system of SPRINTER 690.6
Mazda Diagnostic Program of X-431 Series V32.01
2008-11-12
Compared with the previous version, the followings have been added or improved:
1. Optimized software configuration.
2. Added PCM, TCM, ICM, ABS and RCM for 176 classifications of MAZDA2 (EURO STG3/4 Spers.) model, with functions including: read DTC, erase DTC and read datastream.
SMART Diagnostic Program of X-431Series V15.00
2008-11-10
Compared with the previous version,
reset matching function has been added for KI system of SMART450, 452, 453 chassis in this version.
Nissan Diagnostic Program of X-431 Series V32.01
2008-11-10
Compared with the previous version,
added KWP protocol complied systems as ABS (2b), EPS, LDW and Air pressure monitor for this version.
KIA diagnostic Program of X-431 Series V35.00
2008-11-04
Compared with the previous version, the followings have been added/improved:
Added 3 engine systems, 2 auto transmission systems, ABS system, SRS, fully automatic air conditioning system, and body control module system for CAREN models after 2006.
BMW Diagnostic Program of X-431 Series V36.00
2008-11-04
Compared with the previous version, the followings have been added for this version:
1. Added system category menu for each chassis, and added short test function for chassis E87、E90、E60、E63、E65.
2. Added chassis E70, E71 and R56 and corresponding systems, which including CAS, DDE, DME, EGS,GWS,EKPS、VTC, VTC2, VTG, AL, ARS, DSC, EDCSHL, EDCSHR, EDCSVL, EDCSVR, EHC, EMF, RDC, VDM, ACSM, AHM, AMPH, AMPT, CA, CCC_A, CCC_ANT, CCC_ASK, CCC_BO, CCC_GW, CDC, CHAMP_BO, CHAMP_GW, CID, CNAV, CON, DAB, DVD_C, FD, FKA, FLA, FRM2, FZD, HKL, HUD, IBOC, IHKA, INSTR, JBE2, JNAV, KHM, KNAV, M_ASK_BO, M_ASK_GW, PDC, RFK, RLSS, RSE, SDARS, SINE, SMBF, SMFA, TCU, ULF_SBX, ULF_SBX_H, VM, VSW, Rolling-moment distribution, rear axle and Integrated Chassis Management.
3. The newly added systems for each chassis re as follows:
3.1 Newly added system for 1 Series / E87: DDE, EKPS, AL, EPS, RDC, AHM, CA, CCC-BO, CCC-GW, CHAMP-BO, CHAMP-GW, CID, CON, CVM, DAB, DWA, FRM2, IHR, IHKR, JBE2, JNAV, M-ASK-BO, M-ASK-GW, M-ASK-NAV, PDC, RAD, RAD2-BO, RAD2-GW, SDARS, SINE, SMBF, SMFA, TCU, ULF, ULF-SBX, and ULF-SBX-H.
3.2 Newly added system for 3 Series / E90: GWS, EKPS, VTC, VTC2, VTG, AL, ARS, EDCSHL, EDCSHR, EDCSVL, EDCSVR, EHC, EMF, RDC, VDM, AHM, AMPH, AMPT, CA, CCC-A, CCC-ANT, CCC-ASK, CCC-BO, CCC-GW, CHAMP-BO, CHAMP-GW, CID, CNAV, CON, DAB, DVD-C, FD, FKA, FLA, HKL, HUD, IBOC, JNAV, KHM, KNAV, M-ASK-BO, M-ASK-GW, PDC, RFK, RSE, SDARS, SINE, SMBF, SMFA, TCU, ULF-SBX, ULF-SBX-H, VM, and VSW.
3.3 Newly added system for 5 Series / E60: DDE, EKPS, GWS, SMG, ACC, ACC2, AL, ARS, DSC-PLUS, DSC-Premium, EDC, EHC, LDM, LRR, RDC, AHL, AHM, ALBBF, ALBFA, AMP, CA, CCC-A, CCC-ANT, CCC-ASK, CCC-BO, CCC-GW, CHAMP-BO, CHAMP-GW, CIC, CIC-GW, CNAV, DVD-C, DAB, FD, FLA, HKL, HUD, IHKA2, JNAV, KGM, KHI, KNAV, LM2-AHL2, LM2with, M-ASK-GW, M-ASK-NAV, NVE, NVK, RLSS, SDARS, SHZH, SVS, SZL2, TLC, ULF, ULF-SBX, ULF-SBX-H, VM.
3.4 Newly added system for 6 Series / E63: DDE, EKPS, GWS, SMG, VTC, VTC2, ACC2, ARS2, DSC-PLUS, DSC-Premium, EDC, LDM, LRR, RDC, CA, CCC-BO, CCC-GW, CHAMP-BO, CHAMP-GW, CNAV, CVM, DAB, DVD-C, FLA, HUD, IBOC, IHKA2, JNAV, KBM, KGM, KNAV, LM2-AHL2, LM2with, M-ASK-BO, M-ASK-GW, NVE, NVK, RLSS, SDARS, SHZH, SINE, SMBF, SMFA, SVS, SZL2, TLC, ULF, ULF-SBX, ULF-SBX-H, and VM.
3.5 Newly added system for 7 Series / E65: DDE, DME2, EKPS, VTC, VTC2, VTC2Bank, ACC, ACC2, ARS2, CIM2, EDC, RDC, AHL, AHM, ANT, CA, CEM, CDC, CNAV, DVD-C, DAB, FBI, FBZM, FCON, FD, FKA, FLA, IBOC, JNAV, KHI, KNAV, LM2-AHL2, LM2, LM2with, NVE, NVK, SDARS, SEC, SEC2, SG-FD, SG-FD-GW, SHD, SHZH, SIM, TEL, TCU, and ZBM.
4. Added CANBUS default diagnostic function for all the systems of chassis E87, E90, E60, E63, E65, E70, E71, and R56.
|
