X-431 Standard, Diagun and Master

Renault Diagnostic Program for X-431 Product Family V37.50
2010-03-31
Compared with the previous version, the following contents have been added:
1. For ESPACE IV, the following systems are available:
ABS, AC, SRS, INJECTION(two modes), PANAL, PARKING BRAKE(three modes), LIGHTING, HANDS FREE KIT
2. For CLIO III, the INJECTION and PAS are available;
3. For LAGUNA II PH2, the LIGHTING is available;
4. For SCENIC II, the PARKING ASSISINJECTION and INJECTION are available;

PORSCHE Diagnostic Program for X-431 Product Family V17.10
2010-03-31
Compared with the previous version, the following contents have been added:
1. For the Cayenne models before 2004:
for the systems of DME, Tiptronic, SRS, PSM, Air conditioning, Instrument cluster, STEERING COL. SWITCH, Gateway, KESSY, LEVEL CONTROL, PARKASSISTAN T, SEAT MEMORY-DRIVER, Transfer Case, the function of read input signal is available;
for the system of MAG. Field Sensor, the functions of read datastream and read input signal are available;
for the system of SEAT MEMORY-PASS, the functions of read version information, read DTCs, clear DTCs, read datastream and read input signal are available.
2. For the Cayenne models after 2004:
for the systems of SRS, PSM, Air conditioning, Gateway, KESSY, STEERING COL. SWITCH, SEAT MEMORY-DRIVER, PARKASSISTANT, the function of read input signal is available;
for the systems of DME, SEAT MEMORY-PASS, LEVEL CONTROL, the functions of read datastream and read input signal are available;
for the systems of AHK PANORAMA ROOF, the functions of read version information, read DTCs, and clear DTCs are available;
for the systems of SEAT MEMORY-DRIVER, PARKASSISTANT, the programmable function is available.
3. Following systems have encryption:
PSM and TPM under Cayenne_CAN protocol
TPM under Cayenne_KWP protocol

Citroen Diagnostic Program for X-431 Product Family V32.05
2010-03-31
Compared with the previous version, the following contents have been added/improved:
1. The French program has been updated.
2. The calculation for the coolant temperature sensor (MM4.8.P engine system) has been modified.

SUBARU Diagnostic Program for X-431 Product Family V17.50
2010-03-26
Compared with the previous version, the following contents have been added/improved:
1. The French program has been improved.
2. For EPS, the read datastream function has been added.
3. For ENGINE 0X10, the functions of read DTCs and datastream have been updated.

Mercedes Benz Transporter & V-Class Diagnostic Program for X-431 Product Family V18.10
2010-03-26
Compared with the previous version, the reset function has been added for the CAN instrument system of VITO639.

SMART Diagnostic Program for X-431Product Family V16.00
2010-03-26
Compared with the previous version, the following contents have been added:
1. For the ESP of 451 and 454 chassis, the function of Calibration of steering angle sensor has been added;
2. For the EDG of 454 chassis, the functions of Teach in transmission, Reset of clutch adaptation data, Teach-in process for clutch end stops, Teach-in process for clutch drag point have been added.

Mazda Diagnostic Program for X-431 Product Family V34.60
2010-03-26
Compared with the previous version, the following contents have been added/improved:
1. The menu structure has been revised and perfected.
2. For BONGO/BONGO BRAWNY/SPECTRON, 2 types are available now.
3. For TITAN DASH, 4 types are available now.
4. For MAZDA5(EURO STG3/4/5 and General specs.), 23 types are available now.
5. For PREMACY/MAZDA5(Japan General specs.), 20 types are available now.
6. For MAZDA5(North America Specs.), 28 types are available now.
7. For MX-5(Europe/General Specs.), 18 types are available now.
8. For ROADSTER/MX-5(Japan/General Specs.), 9 types are available now.
9. For MX-5(North America/General Specs.), 42 types are available now.
10. For RX-8(North America Specs.), 8 types are available now.
11. For MPV/Mazda8(JPN/General), 4 types are available now.
12. For RX-8(Europe/General/Japan Specs.), 11 types are available now.
13. For Escape/Tribute(2006/4-), 1 type is available now.
14. For CX-7(North America/General Specs.), 8 types are available now.
15. For CX-9(North America/General Specs.), 2 types are available now.
16. For BT-50/Ranger, 6 types are available now.
Systems in new-added types including:
PCM, ICM, ABS, RCM, GEM, FFH, EATC, EPS, LCM, RKE, RHT, SASM, 4X4
with functions of read DTCs, clear DTCs, read datastream, actuation test and some special programmable installation functions, sensor initialization, DPF, ETB/EGR Initialization, Data Reset and match of injector nozzle.

Mitsubishi Diagnostic Program for X-431 Product Family V26.15
2010-03-26
Compared with the previous version, the following contents have been added/improved:
1. The Japanese program has been updated.
2. The diagnostic functions for old model have been added.

Toyota/Lexus Diagnostic Program for X-431 Product Family V43.10
2010-03-17
Compared with the previous version, the following contents have been improved:
1. The DTCs of SRS has been improved.
2. The read datastream function for the engine flash code(17PIN) has been improved.

SUZUKI Diagnostic Program for X-431 Product Family V26.10
2010-03-16
Compared with the previous version, the following contents have been added/improved:
1. For the Air Bag of (J)FORENZA/RENO (North America), the diagnostic problem has been solved.
2. For the engine systems of (VSE)Santana and L4 RHZRHW, the diagnostic functions of read DTCs, clear DTCs, read datastream and version information are now available.

VOLVO Diagnostic Program for X-431 Product Family V35.10
2010-03-16
Compared with the previous version, the following contents have been added:
1. The diagnostic functions of ECM, TCM, CEM, PSM, CCM, IAM, HCM, KVM and PAM are now available for S80 2007 and 2008.
2. The diagnostic functions of ECM and ABS are now available for S60 and S80 2006.
3. The diagnostic functions of ECM??CEM??PSL??DIM are now available for C70??C30 and XC90 2008.
4. The General Service has been added for service lamp reset in CAN protocol.
5. The special functions are available for the following systems of XC90 B6324S/B8444S:
For ECM: reset learning value
For TCM: reset learning, gearbox oil change counter, position sensor calibration, start position instructions, and start adaptation.
For ABS: Check the adjustment and calibration for brake light switch.
6. The special functions are available for the following systems of C70 (06 -), XC90, V50, S60, S80 and other models:
For CEM: reset the counter at low voltage, collision model, and factory settings; program the rear window wiper while reversing, ignition switch key position, control modules, and short flash process; read and program vehicle model.
For DIM: test various meters; program service distance, service time, engine running time, temperature unit, trip computer unit, the clock, parking brake alarm, seat belt reminders signal; read programmed parameters; and display DSTC information.
For UEM: assemble burglar alarms, set control unit, read the set value.
For REM: calibrate the position sensor of Bi-xenon lamps.

BWM Diagnostic Program for X-431 Product Family V38.60
2010-03-04
Compared with the previous version, the following contents have been revised:
[1]. The DME/DDE has been revised for these chassises: E38, E39, E46, E53, E60, E65, E70, E87 and E90.
[2]. The DSC has been revised for these chassises: E60, E63, E65 and E93.