|
X431 Diagun Display Program V15.29
2009-06-23
Compared with the previous version, the following contents have been added/improved:
1. The French, German, Italian and Portuguese programs are available now. The connector program has been debugged.
2. CAN mask code wave filtering was added in Diagun. The ID filtered by Diagun extends to 128.
3. The system selection of Benz 38 has been corrected in Diagun, sometimes due to the host computer settings.
4. The problem with VW BOSCH protocol in Diagun has been solved.
5. The lower computer failed to send data and the CAN controller will be reset. And reset CAN controller in non-CAN mode. The problem that data was sent wrongly at some pins has been solved. Nissan Diagnostic Program for X-431 Product Family V34.15
2009-06-15
Compared with the previous version, the following contents have been added/improved:
1. The software configuration has been optimized.
2. The C/U INITIALIZATION function of NATS V5.0 in KWP protocol has been modified.
3. The BCM or S/ENT and I-KEY of immobilizer in KWP protocol are now available.
4. The NATS V5.0, BCM or S/ENT and I-KEY of immobilizer in CAN protocol are now available.
5. The problem that the communication failure was indicated by the datastream with the ID 30, 33 and 32 from BCM in CAN protocol has been solved.
6. The problem that the CVT can not be tested for Nissan special protocol has been solved.
Honda Diagnostic Program for X-431 Product Family V35.00
2009-06-15
Compared with the previous version, the following contents have been added/improved:
1. The IMA system test is now available for CAN with the functions of reading DTCs, clearing DTCs, read datastream and function test.
2. The EVAP test of engine is now available.
3. The menu has been modified.
Benz Diagnostic Program for X-431 Product Family V37.00
2009-06-12
Compared with the previous version, the following contents have been added/improved:
1. The functions of fine classification, read version information, read DTCs, clear DTCs, read datastream, actuation test and ECU match of Diesel Engine CD13 and CD14 have been calibrated for each chassis.
2. The Japanese program is available in DIAGUN now.
3. The functions of engine oil reset have been calibrated for chassis of W168, W163 and W202. Land Rover Diagnostic Program for X-431 Product Family V29.20
2009-06-10
Compared with the previous version, the following contents have been added/improved:
1. The systems of instrument cluster and tyre pressure system are available for Range Rover_2006 onward with the functions of read DTCs, clear DTCs and read datastream.
2. The following systems are available for Discovery 2 with the functions of read DTCs, clear DTCs and read datastream: All terrain control module, Audio front control module, Body control module, Front lighting control module, Parking assist control module, Ride level control module, Steering angle sensor module and Transfer case control module.
SAAB Diagnostic Program for X-431Product Family V16.20
2009-06-05
Compared with the previous version, the following contents have been added/improved:
1. The basic functions of version information, read DTCs, clear DTCs and read datastream are available for 2000_93_ENG_Trionic now.
2. The basic functions of version information, read DTCs, clear DTCs and read datastream are available for 2000_93_ENG_Trionic OBDⅡ now.
3. The DTC base of 9-3SPROT has been updated.
GM Diagnostic Program for X-431 Product Family V32.00
2009-06-05
Compared with the previous version, the following contents have been added/improved:
1. The actuation tests of ENG, AT, BCM, IPC, SRS and ABS are now available for CAN protocol 2004-2007. KIA Diagnostic Program for X-431 Product Family V37.00
2009-06-05
Compared with the previous version, the following contents have been added/improved:
In Korean area:
1. The systems of SRS, AAC and power steering system of PRID E (after 2005) are available now.
2. The A/T of Model MORNING Is available now.
3. The A/T of OPIRUS is available now (OLD LAMDA).
4. The problem that the ABS of SORENTO can not be accessed has been solved.
Citroen Diagnostic Program for X-431 Product Family V27.00
2009-06-05
Compared with the previous version, the following contents have been added/improved.
The basic functions of the following systems are available for Model Berlingo: 1.1L HDY&HDZ BOSCH MA3.1, 1.1L HFX BOSCH M7.4.4, 1.4L KFW SAGEM S2000, 1.4L KFX BOSCH MP7.3, 1.4L KFX SAGEM SL96, 1.6L NFU BOSCH ME7.4.4, 1.8L LFX MM1AP, 1.9L WJY LUCAS DCN2, 2.0L RHY BOSCH EDC15C2, ABS electronic distribution, Airbag AUTOLIV, Airbag TRW, CD player, Control panel, Radio post-equipment and RHY SIEMENS SID801.
3. The basic functions of the following systems are available for Model Berlingo 2: 2.0L RFN MM48P, ABR5.3, ABS8.1_BOSCH, ABS8_BOSCH, Additional heating, Airbag, Alarm, BSI, CD player, Control panel, ESP8.1_BOSCH, ESP8_BOSCH, ESP_BOSCH5.7, KFV SAGEM S2000PM1, KFV SAGEM S2000PM2, Multifunction display SAGEM A, Multifunction display SAGEM B, N6A BOSCH ME745, NFS BOSCH ME745, NFU BOSCH ME744, NFU BOSCH ME745, Parking assistance, Radio post-equipment, Rain sensor&Brightness, RHY SIEMENS SID801, Switch module at the steering wheel and WJY DCN2.
|
