|
Toyota/Lexus Diagnostic Software for X-431 Product Family V45.50
2011-07-21
Compared with the previous version (V45.47),
1. DTCs, data stream and actuation test have been updated for Japan area AFS system and Pre-Crash 2 system.
2. DTCs, data stream and actuation test have been updated for Japan area Air conditional system.
3. The working support has been updated for REIZ model EMPS system.
4. The redundancy of working supported repairing mode for ABS/VSC/TRC system has been deleted for some Japan area vehicle models.
5. The existent controlling conditions of EMPS system working support STEERING Zero POINT correction has been improved.
6. The abnormal of Hybrid powertrain system working support repairing mode has been improved.
7. The function configuration abnormal of EMPS/EHPS for ISO D products Japan area has been revised.
8. For some Japan area vehicle, the abnormal that ABS/VSC/TRC system working support ACCUMULATOR zero down drive can not be operated successfully has been revised.
JAGUAR Diagnostic Software for X-431 Product Family V16.80
2011-07-21
Compared with the previous version (V16.70),
1. For 2006-2009 S-TYPE(2.7L diesel), the ECM, TCM, ABS, SRS, Instrument Panel, Parking Brake Control Module, Climate Control Module, Parking Assistant Control Module, Auxiliary Heater Control Module, and Headlight leveling system have been added.
2. for 2006-2009 S-TYPE(3.0L normal air intake), the ECM, TCM, ABS, SRS, Instrument Panel, BCM, Climate Control Module, and TPM have been added.
3. For 1997-1999 XK-TYPE(4.0L normal air intake) the ECM, TCM, ABS, SRS, Instrument Panel, BCM, Climate Control Module, and Key Converter have been added.
4. for 2006-2010??XK-TYPE(5.0L V8 added), the ECM, TCM, ABS, SRS, HVAC Control Module, VASS control Module, Auxiliary JB(BCM B), Central JB(BCM), TPM, Parking Brake Control Module, Driver Door Module, Driver Seat Module, Passenger Door Module, Passenger Seat Module, Parking Assistant Control Module, Folding Roof Control Module, Headlight Control Module, Speed Control Module, and Vehicle Keyless Entering Module have been added.
5. The text library in English has been updated.
Euro Ford Diagnostic Software for X-431 Product Family V38.40
2011-07-21
Compared with the previous version (V38.30),
1. The vehicle coverage for the following models has been optimized:
(1) Fiesta
(2) Fiesta SE
(3) Fusion
(4) C-MAX
(5) Galaxy/S-MAX
(6) KA
(7) NOVO KA
(8) Transit Connect
(9) S.A.COURIER
(10) S.A.FIESTA
2. The calling system function has been optimized.
3. For vehicle model Focus,C-MAX CAN category, the ESP sensor calibration function has been optimized for ABS system.
4. For FUSION model Auto Shift Manual category, the Learn Clutch Touch Point function has been added for TCM system.
USA FORD Diagnostic Software for X-431 Product Family V38.90
2011-07-21
Compared with the previous version (V38.80), the following has been added:
1. The inquire system entering method has been added and its vehicle coverage includes:
Explorer,Focus,FocusC-MAX,Ford GT,Fusion,Mondeo,
Focus Cabriolet,E-Series,Ranger,Taurus X,Flex,
FocusVIN=LFA/LVS/AFA/PE1/FFJ,Mustang,Milan,Transit,
BT-50/Ranger,Everest/Endeavour,Escort,Windstar,
F-Series Super Duty,Fiesta/Mazda121/Bantam
2. Fast test function has been added for:
Explorer,Focus,FocusC-MAX,Ford GT,Fusion,Mondeo,
Focus Cabriolet,E-Series,Ranger,Taurus X,Flex,
FocusVIN=LFA/LVS/AFA/PE1/FFJ,Mustang,Milan,Transit,
BT-50/Ranger,Everest/Endeavour,Escort,Windstar,
F-Series Super Duty,Fiesta/Mazda121/Bantam
GM Diagnostic Software for X-431 Product Family V40.10
2011-07-18
Compared with the previous version (V40.00),
The actuation test has been added for 1996-2009 BCM system.
Mazda Diagnostic Program for X-431 Product Family V36.20
2011-07-18
Compared with the previous version (V36.10),
The following vehicle engine types have been improved and optimized:
1. AXELA/MAZDA3(Japan/General Specs.) model, engine type: 1.5L(ZY)
2. CX-7(North America/General Specs.) model, engine type: 2.3L (L3_T)
3. CX-7(Europe/General Specs.) model, engine type: 2.2L(R2_T), 2.3L(L3_T)
4. MAZDA2(China) model, 1.3L(ZJ) model, engine type: 1.5L(ZY)
5. MAZDA6(GH,Before Facelift) model, engine type: 2.2L(R2_T)
6. Biante(Japan), 2.3L(L3) model, engine type: 2.0L(LF)
7. AXELA/MAZDA3 model, engine type: 2.0L(LF), 2.2L(R2_T), 2.5L(L5)
8. PREMACY/MAZDA5 model, engine type: 2.5L(L5)
9. MAZDA6(GH,After Facelift)/ATENZA model, engine type: 2.5L(L5), 2.2L(R2_T)
10. Escape/Tribute/Mariner model, engine type: 2.5L(DURATEC-HE/I4), 3.0L(4V)
11. DEMIO(JAN)/MAZDA2(OTHER) model, engine type: 1.5L(ZY)
12. MAZDA6(North America/General) model, engine type: 2.3L(L3), 3.0L(AJ)
13. MPV/Mazda8(JPN/General) model, engine type: 2.3L(L3)
14. CX-9(North America/General Specs.) model, engine type: 3.5L(CY), 3.7L(CY)
15. ATENZA(JPN)/MAZDA6(General) model, engine type: 2.0L(LF), 2.3L(L3)
16. MAZDA3(North America/General) model, engine type: 2.0L(LF), 2.3L(L3)
17. MAZDA6(EURO STG3/4 and General) model, engine type: 1.8L(L8), 2.3L(L3)
18. CX-7(Japan/General Specs.) model, engine type: 2.3L(L3_T)
19. PREMACY/MAZDA5 (Japan/General Specs.) model, engine type: 2.3L(L3)
20. MPV(JPN/GENERAL)model, engine type: 2.3L(L3)
21. MAZDA3(EURO STG3/4/5 and General Specs.) model, engine type: 2.0L(LF)
22. MX-5(North America/General Specs.) model, engine type: 2.0L(LF)
The systems that improved and optimized above are: 4X4, ABS, AM, ACU, AFS, EATC, EPS, FFH, GEM, ICCM, ICM, LCM, LPSDM, LTM, MID, MPM, PCM, RCM, RKE, RPSDM, RVM and TCM.
The functions that improved and optimized systems above are: read DTCs, clear DTCs, read data stream, programmable matching, ABS sensor initialization, EATC operating inspection, N gear learning, wiper sensor reset, set the steering angle, throttle initialization, DPF, injector nozzle matching, data resetting, and RVM aiming, etc.
Benz Diagnostic Software for X-431 Product Family V44.40
2011-07-14
Compared with the previous version (V44.35),
1. The read DTCs, clear DTCs, data stream, actuation test and special function have been added for MESFI system under 169/245, 204 chassis.
2. The connectors prompt has been revised for each product.
Holden Diagnostic software for X-431 Product Family V36.00
2011-07-14
Compared with the previous version (V35.02),
1. The programming function has been added for VZ&WL Series ->Body->Powertrain Interface Module-PIM.
2. For VZ and WL Series, the actuation test and programming function have been added for Engine->V6, Autotransmission, and ABS/TC/ESP 8.0.
3. For VE and WM Series, data stream, actuation test and programming function have been added for Engine->V6.
4. For VE and WM Series, read DTCs, clear DTCs, data steam and actuation test and programming have been added for Transmission->5 Speed Autotransmission system.
5. For VE and WM Series, the actuation test and programming function have been added for EBCM, BCM, and Body->IPC.
6. For VE and WM Series, the programming function has been added for Body->Immobiler.
SUZUKI Diagnostic Software for X-431 Product Family V28.20
2011-07-14
Compared with the previous version (V28.11),
For North America XL7 serials: the 16 systems basic function has been added for 07-09 engine system module, body module, and chassis module.
SAAB Diagnostic Software for X-431 Product Family V19.10
2011-07-12
Compared with the previous version (V19.00), the following have been added:
1. For 2008 SAAB 9-7X, actuation test and special functions have been added for three Engine systems.
KIA Diagnostic Program for X-431 Product Family V40.41
2011-07-12
Compared with the previous version (V40.40),
The data stream function has been added for 2006 gasoline engine of CARNIVAL/SEDONA vehicle model.
Citroen Diagnostic Software for X-431 Product Family V39.30
2011-07-12
Compared with the previous version (V39.25),
1. The following functions have been added for Telematics unit under two vehicle models: read version info, read DTCs, clear DTCs, read data stream, actuation test, and matching function.
2. The following functions have been added for Telematics NG4 navigation radio under one vehicle models: read version info, read DTCs, clear DTCs, read data stream, actuation test, and matching function.
3. The following functions have been added for Telematics RNEG navigation radio under six vehicle models: read version info, read DTCs, clear DTCs, read data stream, actuation test, and matching function.
4. The following functions have been added for Telematics RT3 under fourteen vehicle models: read version info, read DTCs, clear DTCs, read data stream, and actuation test.
5. The following functions have been added for Telematics RT4 under thirteen vehicle models: read version info, read DTCs, clear DTCs, read data stream, and actuation test.
6. The following functions have been added for Telematics RT5 under eight vehicle models: read version info, read DTCs, clear DTCs, read data stream, and actuation test.
7. The following functions have been added for Control panel under twenty-five vehicle models: read version info, read DTCs, clear DTCs, read data stream, actuation test, and matching function.
8. The following functions have been added for Control panel under three vehicle models (the twenty-five models upper are not include): read version info, read DTCs, clear DTCs, read data stream, actuation test, and actuation test.
CHRYSLER Diagnostic Software for X-431 Product Family V27.23
2011-07-12
Compared with the previous version (V27.22), the following have been added for CAN protocol:
1. Six special functions have been added for BCM system: Temporary Tip Start Disable, Enable Front Fog Lamp Output, Disable Radio Clock Display, Headlamps Delay Time, Program Network Configuration, and Add Navigation Radio.
CHRYSLER Diagnostic Software for X-431 Product Family V27.22
2011-07-08
Compared with the previous version (V27.21), the following have been added for CAN protocol:
1. Four special functions have been added for TCM system: Quick Learn; Clear Variable line pressure (VLP) counters; Reset Learned Adaptives; Store Learned Adaptives.
2. Two special functions have been added for SRS system: Initialize ORC; Rollover Detection.
GM Diagnostic Program for X-431 Product Family V40.00
2011-07-08
Compared with the previous version (V39.01), the following has been added:
1. The 2009 body system has been added, and its functions include: read DTCs, clear DTCs, read data stream, read version info, and special function.
2. The DTCs has been added for 2008 Park Assist Module
Nissan Diagnostic Program for X-431 Product Family V40.11
2011-07-08
Compared with the previous version (V40.10), the follow Japan area models have been added:
1. 2009/12 all systems for SKYLINE V36 model.
2. 2010/07 all systems for TEANA J32 model.
3. for X_TRAIL T31 model: all systems of 2007/06, 2009/11, 2010/06.
4. for WINGROAD Y12 model: all systems of 2005/11, 2006/12, 2008/01, 2010/08
5. 2008/08 all systems for MURANO Z51 model.
6. for FAIRLADY Z_Z33 model: all systems of 2007/01, 2008/10, 2009/09, 2010/10.
7. for FAIRLADY Z_HZ34 model: all systems of 2009/09, 2010/10.
8. for LAFESTA B30 model: all systems of 2004/12, 2005/12, 2007/04, 2010/08.
9. 2009/01 all systems for CARAVAN E25 model.
DAIHATSU Diagnostic Program for X-431 Product Family V19.37
2011-07-08
Compared with the previous version (V19.36),
1. DTCs have been updated for some vehicle models: Mira, Move, YRV, Atrai-7/Hijet Grancargo, Opti, Storia, Tanto, Terios, Terios Kid/Lucia, Naked, Hijet/Atrai, Max, Mira Gino, etc.
2. The configuration structure for the function of the software system has been optimized.
3. Supporting more products (not support Top product)
Daewoo Diagnostic Program for X-431 Product Family V25.30
2011-07-08
Compared with the previous version (V25.20),
1. For MATIZ(M300)SPARK model: the basic function has been added for: POWER TRAIN(LPG CONTROL MOD.(ICM-LPGI, A/T CONTROL MODULE), CHASSIS(BRAKE CONTROL MODULE(EBCM)), BODY??AIRBAG CONTROL MODULE(SDM), INS.CLUSTER CTRL MOD(IPC) systems.
Peugeot Diagnostic Software for X-431 Product Family V41.30
2011-07-08
Compared with the previous version (V41.25),
1. For seventeen models, the read version info, read DTCs, clear DTCs, read data stream, actuation test and matching special functions have been added for Air conditioning system.
2. For twenty models, the read version info, read DTCs, clear DTCs, read data stream, actuation test and matching special functions have been added for Radio system.
Peugeot Diagnostic Software for X-431 Product Family V41.25
2011-07-05
Compared with the previous version (V41.20),
1. For nineteen models, the read version info, read DTCs, clear DTCs, read data stream, actuation test and matching special functions have been added for Instrument system.
2. For nineteen models, the read version info, read DTCs, clear DTCs, read data stream, actuation test and matching special functions have been added for CD player system.
Benz Diagnostic Program for X-431 Product Family V44.35
2011-07-05
Compared with the previous version (V44.30), the following has been improved:
1. For ME2.7.2 system, the detailed classification, basic function actuation test and the development of the special function have been completed.
2. For CDID system, the detailed classification, basic function actuation test and the development of the special function have been completed.
3. The solution about the unknown version info in the function of SystemProcessMultiID.
4. For ISOD product, the program about special function configuration has been revised.
5. Solved the blank function display for entering some systems (FSCU, KLA, ES, etc.)
AUDI Diagnostic Program for X-431 Product Family V25.82
2011-07-05
Compared with the previous version (25.81),
1. The basic adjustment and channel info help corresponding to channel matching for the following sixteen systems have been added: 01 Engine System, 02 AT, 03 ABS, 15 SRS, 17 IPM, 35 Central Locking System, 46 Central Module, 16 Steering System, 34 Leveling Suspension System, 65 TPC, 08 A/C /Heating system, 44 Power Steering System, 25 Engine Immobilizer System and, 53 Parking System.
2. For the instrument cluster under UDS protocol, twelve modes have been added with data stream function.
3. DTCs library in Italian has been updated.
4. The diagnostic software has been optimized.
SKODA Diagnostic Program for X431 Product Family V24.82
2011-07-05
Compared with the previous version (24.80),
1. The basic adjustment and channel info help corresponding to channel matching for the following sixteen systems have been added: 01 Engine System, 02 AT, 03 ABS, 15 SRS, 17 IPM, 35 Central Locking System, 46 Central Module, 16 Steering System, 34 Leveling Suspension System, 65 TPC, 08 A/C /Heating system, 44 Power Steering System, 25 Engine Immobilizer System and, 53 Parking System.
2. For the instrument cluster under UDS protocol, twelve modes have been added with data stream function.
3. DTCs library in Italian has been updated.
4. The diagnostic software has been optimized.
VW Diagnostic Program for X-431 Product Family V25.82
2011-07-05
Compared with the previous version (25.81),
1. The basic adjustment and channel info help corresponding to channel matching for the following sixteen systems have been added: 01 Engine System, 02 AT, 03 ABS, 15 SRS, 17 IPM, 35 Central Locking System, 46 Central Module, 16 Steering System, 34 Leveling Suspension System, 65 TPC, 08 A/C /Heating system, 44 Power Steering System, 25 Engine Immobilizer System, and 53 Parking System.
2. For the instrument cluster under UDS protocol, twelve modes have been added with data stream function.
3. DTCs library in Italian has been updated.
4. The diagnostic software has been optimized
SEAT Diagnostic Program for X-431 Product Family V24.82
2011-07-05
Compared with the previous version (24.80),
1. The basic adjustment and channel info help corresponding to channel matching for the following sixteen systems have been added: 01 Engine System, 02 AT, 03 ABS, 15 SRS, 17 IPM, 35 Central Locking System, 46 Central Module, 16 Steering System, 34 Leveling Suspension System, 65 TPC, 08 A/C /Heating system, 44 Power Steering System, 25 Engine Immobilizer System and, 53 Parking System.
2. For the instrument cluster under UDS protocol, twelve modes have been added with data stream function.
3. DTCs library in Italian has been updated.
4. The diagnostic software has been optimized.
FIAT Diagnostic Program for X-431 Product Family V31.20
2011-07-05
Compared with the previous version (V31.12),
1. The following twenty systems have been added with the function of version info, read DTCs, clear DTCs, data stream, actuation test and special function:
Siemens AL4 TA2000 V PSA Automatic Gearbox
Automatic Gearbox Marelli SELESPEED CFC308F
Marelli SELESPEED CFC328 Automatic Gearbox
BOSCH ABS 5.7 VDC
AISIN YLII 5 Automatic Gearbox(1)
Motorola Injection CF4/EOBD (eng. 2.2)
Poor Steering TRW 2
Bosch EDC16C39 CF4/EOBD Diesel Injection (eng 2.3/3.0)
Metatron 6A0 Gas Injection
Magneti Marelli IAW 4EF/4AF Gas Injection
Bosch EDC16C9 CF4/EOBD Diesel Injection(1.9 eng)
Magneti Marelli Injection IAW 4SFG
Bosch Motronic Me3.1 EOBD injection (eng. 2.0/2.4 20V)
Injection - Bosch Motronic Me3.1 (eng. 2.0/2.4 20v) Outside EEC
Bosch EDC 15 PSA Diesel Injection (2.0 8v v60 eng.)
Bosch EDC 15 PSA Diesel Injection (eng. 16v)
Bosch EDC 15 PSA Diesel Injection (eng. 2.0 8v)
Visteon CF4/EOBD Diesel Injection(eng.2.2)
Hitachi MPI injection(eng.1.8 16V 98)
Bosch Diesel Injection EDC17CP52 EURO V/EOBD(eng.3.0)
2. The special function for the following three systems has been revised:
Marelli Injection IAW 5SF3 CF4/EOBD(EP eng.8V)
Marelli 6F3 EOBD CAN Diesel injection(EP eng.1.3 JTD)2
Magneti Marelli Injection IAW 5SF8 Natural Power(EP eng.8V)
Citroen Diagnostic Software for X-431 Product Family V39.25
2011-07-05
Compared with the previous version (V39.20),
1. For BERLINGO (B9)/C3 PICASSO/C4 SEDAN, the matching function for engine 9HX BOSCH EDC16C34 DV6ATED4-90CV system has been revised.
2. For C5(X7) model, the initialization and matching functions have been revised for engine system XFV BOSCH ME747.
Korean Hyundai Diagnostic Program for X-431 Product Family V46.20
2011-07-05
Compared with the previous version (V46.10),
1. For 2102 SONATA model vehicles, the following system has been added: Engine system, transmission system, ABS, SRS, Immobilizer System, and air conditioning system.
VOLVO Diagnostic Software for X-431 Product Family V41.40
2011-07-05
Compare with the previous version (V41.31),
Read DTCs function for Quick Test has been added for the following models:
1. S60 model from 2001 to 2009
2. S80 (-06) model from 1999 to 2006
3. XC70 (01-07) model from 2001 to 2007
4. XC90 model from 2003 to 2010
5. S80 (07- ) model from 2007 to 2010
6. V70 (08- ) model from 2008 to 2010
7. XC70 (08- ) model from 2008 to 2010
8. XC60 model from 2009 to 2010
Toyota/Lexus Diagnostic Program for X-431 Product Family V45.47
2011-07-05
Compared with the previous version (V45.46),
1. Select all and manual select are added for data stream.
2. Tire Pressure Monitoring System ID registration function has been added for RX450H, LS460, etc. some models, and the abnormal ID registration function for Tire Pressure Monitoring System of RAV4??GS300??IS250C??TUNDRA, etc. some models have been solved.
3. The interface for back-up storage deleting and mode changing of ABS/VSC/TRC system has been optimized.
4. The abnormal freeze frame P_1200 of some model engine system has been solved.
5. The classification order for data stream has been optimized, and the other data streams are arranged to the end.
Citroen Diagnostic Software for X-431 Product Family V39.20
2011-07-05
Compared with the previous version (V39.15),
1. For 16 CAN models, the Switch module at the steering wheel has been added with read version info, read DTCs, clear DTCs, read data stream, and actuation test functions.
2. For 9 Non-CAN models, the Switch module at the steering wheel has been added with read version info, read DTCs, clear DTCs, read data stream, and actuation test functions.
3. For 16 models, the Engine relay unit has been added with read version info, read DTCs, clear DTCs, read data stream, and actuation test functions.
4. For 26 models, the Radio has been added with read version info, read DTCs, clear DTCs, read data stream, actuation test and matching functions.
LANDROVER Diagnostic Program for X-431 Product Family V30.60
2011-07-05
Compared with the previous version (V30.51),
1. The following special functions have been added for the RangeRover(2006) and RangeRover(2007-2009): Rain sensor initialization, Sliding roof module, rain sensor windshield setting, service mode enabled, service mode disabled.
2. The following special functions have been added for RangeRoverSport(2006-2009): bake bleeding module, the third button configuration, seat pad replacement, Vertical Accelerator Calibration, put the parking break to installing position, put the parking break to locked position, parking break block dismissed procedure.
3. The following system has been added for RangeRover(2007-2009): differential control module Rear, Heater A/C control module, Light checking module, Steering wheel lock module, Body module, Driver Seat Module, rain sensor.
4. Pedal control module has been added for RangeRover(2006)
5. The following system has been improved for RangeRover(2006): Heater A/C control module, Light checking module, Steering wheel lock module, parking assistant control module.
Mazda Diagnostic Program for X-431 Product Family V36.10
2011-07-05
Compared with the previous version (V36.01),
1. For MAZDA6(North America/General) models, the 3.7L(CA) engine EATC, GEM, and LCM have been added with read DTCs, clear DTCs, data stream, programmable installation, and operation checking functions.
2. for MAZDA6(GH, After Facelift)/ATENZA models, the 1.8L(L8)??2.0L(LF)??2.2L(R2_T)?? 2.5L(L5) engine system ABS, GEM, and ICM have been added with programmable installation function.
3. For MAZDA6(China) model, the 2.0L(LF)??2.5L(L5) engine systems ABS, EATC, EPS, GEM, ICM, LCM, PCM, and TCM have been added with read DTCs, clear DTCs, programmable installation, operation checking neutral gear setting, rain sensor reset, etc. functions.
4. for MAZDA6(Middle East/General) models, the 2.5L(L5)??3.7L(CA) engine systems ABS, BSML, BSMR, EATC, GEM, ICM, LCM, PCM, RCM have been added with read DTCs, clear DTCs, programmable installation, and operation checking functions.
5. For DEMIO (JAN)/MAZDA2 (OTHER) models, the 1.3L (ZJ) engine system has added with programmable installation.
6. For MAZDA6 (North America/General) models, the 3.7L (CA) engine system RCM has been improved and optimized with programmable installation.
7. For CX-9(North America/General Specs.) models, the 3.5L(CY)??3.7L(CA) engine systems 4X4, ABS, AM, BSML, BSMR, GEM, ICM, LCM, LTM, PCM, RCM, TCM have been improved and optimized with read DTCs, clear DTCs, data stream, ABS initialization, programmable installation, rain sensor reset, neutral gear setting functions.
8. For MAZDA6(GH, After Facelift)/ATENZA models, the 1.8L(L8)??2.0L(LF)??2.2L(R2_T)??2.5L(L5) engine systems ABS has been improved and optimized with programmable installation.
9. For (All MY05)Escape/Tribute/Maverick/Mariner models, the 2.3L(DURATEC-HE/I4) engine systems 4X4??PAM have been improved and optimized with read DTCs, clear DTCs, and data stream functions.
10 For Escape/Tribute/Mariner models, the 2.5L(HEV/ATKINSON 4V)??2.5L(DURATEC-HE/I4)??3.0L(4V)??2.5L(HEV/ATKINSON 4V) engine systems ABS, GEM, ICM, PCM, RCM have been improved and optimized with read DTCs, clear DTCs, and data stream functions.
ROMEO Diagnostic Program for X-431 Product Family V18.03
2011-07-05
Compared with the previous version (V18.02),
For 147, 159 models, the basic and special function for instrument cluster has been revised with the following functions: Mannesman VDO instrument panel??Instrument panel Siemens 2.
Euro Ford Diagnostic Program for X-431 Product Family V38.30
2011-07-05
Compared with the previous version (V38.21),
1. For focus 1.6L DIESEL model, the DPF static rebirth function has been optimized.
2. The vehicle coverage for focus, mondeo, transit model has been optimized.
3. For focus 1.6L model, the KOEO read DTCs for PCM system has been optimized.
4. The calling system function has been optimized.
5. The module installation function has been optimized.
6. The text libraries in German, French, Arabic and simplified Chinese have been optimized.
7. The Short test has been added.
Honda Diagnostic Program for X-431 Product Family V43.31
2011-07-05
Compared with the previous version (V43.30),
1. SCS (Service Check Signal) function has been added.
2. System search function has been added.
3. For each system, the read data stream has been optimized, the options for auto select and manual select has been added.
4. The system entering for Airbag has been optimized.
5. The adjust function for TPMS system has been updated.
JAGUAR Diagnostic Program for X-431 Product Family V16.70
2011-07-05
Compared with the previous version (V16.61),
1. For XJR 2001-2002, the engine system, transmission system, ABS, airbag system, and instrument cluster have been added.
BMW Diagnostic Software for X-431 Product Family V43.40
2011-07-05
Compared with the previous version (V43.30), the following have been added:
1. For E34, E39, E24, E32, E38 etc. chassis, the version info, data stream, read DTCs, clear DTCs, and actuation test functions have been added for DME/DDE Digital motor/Diesel electronics and LSZ/LCM Light switching center systems.
2. For F01, F07, F10, F25 etc. chassis, the version info, data stream, read DTCs, clear DTCs, and actuation test functions have been added for DME/DDE Digital motor/Diesel electronics, DSC Dynamic Stability Control, ACSM Crash Safety Module, and CID Central Information Display.
3. For E34, E39, E24, E32, E38 etc. chassis, the version info for SBSL Satellite, B-pillar, left, SBSR Satellite, B-pillar, right, SMF Seat memory, driver system, the read DTCs for EGS Transmission system, the data stream and clear DTCs for ABS/ACS/DSC Dynamic Stability Control system, and the data stream for ZKE Central body electronic, RAD Radio system have been improved.
4. For F01, F07, F10, F25 etc. chassis, the special function for DME/DDE Digital motor/Diesel electronics system, the data stream for ZGM Central Gateway Module, CD Control Display, PDC Park Distance Control, CD-GW, CAS Car Access System, and the DTCs for VTG Transfer case system have been improved.
|
